Save on Mitutoyo 536-135 Blade Type Vernier Caliper, 0-200mm Range, +/-0.05mm Accuracy, 0.05mm Graduation our mission is to give you the facts you need. so you can get on the road to taking action right away. Massive Saving Order Now.Mitutoyo 536-135 Blade Type Vernier Caliper, 0-200mm Range, +/-0.05mm Accuracy, 0.05mm Graduation for the best price by Mitutoyo 536-135 Blade Type Vernier Caliper, 0-200mm Range, +/-0.05mm Accuracy, 0.05mm Graduation comparing prices offered by the top rated Mitutoyo 536-135 Blade Type Vernier Caliper, 0-200mm Range, +/-0.05mm Accuracy, 0.05mm Graduation stores online.. Mitutoyo 536-135 Blade Type Vernier Caliper, 0-200mm Range, +/-0.05mm Accuracy, 0.05mm Graduation
Lowest Price :$326.26 (Visit store to check price)
Technical Details :
Simple metric measuring scales, for ease of use
Thin, blade type jaws fit into small grooves and tracks, for hard to obtain outside (OD) measurements
Four-way measurement capability with carbide-tipped OD measuring faces, for precision measuring
Hardened stainless steel construction with satin chrome finish, for protection of caliper and easy reading
Raised sliding surfaces for preventing defacement and wear of scale graduations
The Mitutoyo 536-135 vernier caliper performs precise measurements to within 0.05 mm, for applications requiring high levels of accuracy, especially in scientific research and in industries where parts must fit exactly. This caliper takes inside, outside, depth, and centering readings.
The vernier caliper has a fixed (main) scale and a movable (vernier) scale. The vernier scale moves over the main scale rule to give a fractional measurement which is added to the measurement of the main scale to achieve a more accurate result. The main scale may be marked in inches, millimeters, or both. The vernier scale may be marked in inches or millimeters. The 536-135 measures in millimeters. A thumbwheel permits fast measuring, and a rotating screw controls the caliper’s movement.
The 536-135 measures in metric units. The vernier reading of the lower scale is 0.05 mm. The scales are raised to slide easily and protect the graduation markings. A thumbwheel permits fast and easy measuring. A clamping screw on the upper scale rotates to control scale movement and locks to hold the sliding jaw’s position. It weighs 160g and is made of hardened stainless steel construction with a satin chrome finish. With its fixed and movable jaws, it has four-way measurement capability: outer diameter (OD), inner diameter (ID), depth, and step, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer "steps" are measured. This caliper has carbide-tipped jaw faces for outside measurements. It has a main slide length of 288 mm, lower jaw depth of 50 mm, a lower jaw pre-blade thickness of 3 mm, a lower jaw narrow blade length and width of 25 mm/0.75 mm, and a beam width of 16 mm. Model 536-134 has a depth bar. Range is 0 - 200mm, Resolution is 0.05 mm, and Accuracy is rated at + or - 0.05 mm, which meets Federal Accuracy Specifications GGG-C-111B.
Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used for measuring size differential between two objects, as well. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices.
Founded in Tokyo in 1934, Mitutoyo is a leader in the metrology field, producing high-quality measurement products, including mechanical, dimensional gauging products, focusing on micrometers, calipers, indicators, and other measurement tools, as well as output gauges, interfaces, data collectors, and analysis software. Mitutoyo formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, Illinois, with additional locations in the U.S. and Canada.
The Mitutoyo 536-135 is supplied in a fitted plastic case.
The owner of this website "www.cheapmitutoyocaliper.info" is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
Amazon, the Amazon logo, Endless, and the Endless logo are trademarks of Amazon.com, Inc. or its affiliates.
$326.26(Visit store to check price)Product Description :
The Mitutoyo 536-135 vernier caliper performs precise measurements to within 0.05 mm, for applications requiring high levels of accuracy, especially in scientific research and in industries where parts must fit exactly. This caliper takes inside, outside, depth, and centering readings.
The vernier caliper has a fixed (main) scale and a movable (vernier) scale. The vernier scale moves over the main scale rule to give a fractional measurement which is added to the measurement of the main scale to achieve a more accurate result. The main scale may be marked in inches, millimeters, or both. The vernier scale may be marked in inches or millimeters. The 536-135 measures in millimeters. A thumbwheel permits fast measuring, and a rotating screw controls the caliper’s movement.
The 536-135 measures in metric units. The vernier reading of the lower scale is 0.05 mm. The scales are raised to slide easily and protect the graduation markings. A thumbwheel permits fast and easy measuring. A clamping screw on the upper scale rotates to control scale movement and locks to hold the sliding jaw’s position. It weighs 160g and is made of hardened stainless steel construction with a satin chrome finish. With its fixed and movable jaws, it has four-way measurement capability: outer diameter (OD), inner diameter (ID), depth, and step, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer "steps" are measured. This caliper has carbide-tipped jaw faces for outside measurements. It has a main slide length of 288 mm, lower jaw depth of 50 mm, a lower jaw pre-blade thickness of 3 mm, a lower jaw narrow blade length and width of 25 mm/0.75 mm, and a beam width of 16 mm. Model 536-134 has a depth bar. Range is 0 - 200mm, Resolution is 0.05 mm, and Accuracy is rated at + or - 0.05 mm, which meets Federal Accuracy Specifications GGG-C-111B.
Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used for measuring size differential between two objects, as well. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices.
Founded in Tokyo in 1934, Mitutoyo is a leader in the metrology field, producing high-quality measurement products, including mechanical, dimensional gauging products, focusing on micrometers, calipers, indicators, and other measurement tools, as well as output gauges, interfaces, data collectors, and analysis software. Mitutoyo formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, Illinois, with additional locations in the U.S. and Canada.
The Mitutoyo 536-135 is supplied in a fitted plastic case.
MORE DETAILS >>Similar Products