Save on Mitutoyo 500-775 Digital Caliper, IP67, LCD, Solar Powered, 0-200mm Range, +/-0.02mm Accuracy, 0.01mm Resolution our mission is to give you the facts you need. so you can get on the road to taking action right away. Massive Saving Order Now.Mitutoyo 500-775 Digital Caliper, IP67, LCD, Solar Powered, 0-200mm Range, +/-0.02mm Accuracy, 0.01mm Resolution for the best price by Mitutoyo 500-775 Digital Caliper, IP67, LCD, Solar Powered, 0-200mm Range, +/-0.02mm Accuracy, 0.01mm Resolution comparing prices offered by the top rated Mitutoyo 500-775 Digital Caliper, IP67, LCD, Solar Powered, 0-200mm Range, +/-0.02mm Accuracy, 0.01mm Resolution stores online.. Mitutoyo 500-775 Digital Caliper, IP67, LCD, Solar Powered, 0-200mm Range, +/-0.02mm Accuracy, 0.01mm Resolution
Lowest Price :$238.74 (Visit store to check price)
Technical Details :
Lightweight, hardened stainless steel construction for protection of caliper and ABSOLUTE linear encoder technology components
Solar-powered for continued use without battery replacement
Four-way measurement capability for multiple applications: outer diameter (OD), inner diameter (ID), depth, and step
Meets IP67 for protection from dust and against temporary submersion in water
Large, digital, single-value readout LCD display for readability
The Mitutoyo 500-775 Super Caliper is a solar-powered digital caliper made of durable hardened stainless steel using Mitutoyo’s ABSOLUTE linear encoder technology. Its impact-resistant display increases durability and IP67 protection ensures waterproof reliability. This has no need for origin setup and can be used in any location, including dimly lit areas, and can be operated without replacing batteries.
Although identical to dial and vernier calipers in its ability to make precise measurements, this digital solar caliper also has an LCD, increasing reading reliability. In environments with available light of 60 Lux or more, the caliper becomes active even it its uncharged state; it can immediately start measuring without zero resetting and operating speed is unrestricted.
The 500-775 has the ABSOLUTE electromagnetic induction linear encoder. It weighs 210 g and measures outer diameter (OD), inner diameter (ID), depth, and step, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer "steps" are measured. Outside jaw depth is 50 mm, inside jaw length is 24.5 mm, inside jaw depth is 20 mm, and beam width is 16 mm. Range is 0 to 200 mm, LCD resolution is 0.01 mm, repeatability is 0.0005”/0.01 mm, and accuracy is rated + or - 0.02 mm. Dust/water protection level is IP67. An alarm alerts the user to counting value composition errors. A rolling thumbwheel makes fine adjustments and a thumbscrew locks the scale’s position. Response speed is unlimited. This caliper does not have Statistical Process Control (SPC) Data Output capability. The caliper can be used continuously above 60 Lux ambient illumination. The built-in solar cells can store energy for up to one hour of caliper operation in 50 Lux light.
Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used for measuring size differential between two objects, as well. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices.
Founded in Tokyo in 1934, Mitutoyo is a leader in the metrology field, producing high-quality measurement products, including mechanical, dimensional gauging products, focusing on micrometers, calipers, indicators, and other measurement tools, as well as output gauges, interfaces, data collectors, and analysis software. Mitutoyo formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, Illinois, with additional locations in the U.S. and Canada.
The Mitutoyo 500-775 comes in a fitted, plastic case.
The owner of this website "www.cheapmitutoyocaliper.info" is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
Amazon, the Amazon logo, Endless, and the Endless logo are trademarks of Amazon.com, Inc. or its affiliates.
$238.74(Visit store to check price)Product Description :
The Mitutoyo 500-775 Super Caliper is a solar-powered digital caliper made of durable hardened stainless steel using Mitutoyo’s ABSOLUTE linear encoder technology. Its impact-resistant display increases durability and IP67 protection ensures waterproof reliability. This has no need for origin setup and can be used in any location, including dimly lit areas, and can be operated without replacing batteries.
Although identical to dial and vernier calipers in its ability to make precise measurements, this digital solar caliper also has an LCD, increasing reading reliability. In environments with available light of 60 Lux or more, the caliper becomes active even it its uncharged state; it can immediately start measuring without zero resetting and operating speed is unrestricted.
The 500-775 has the ABSOLUTE electromagnetic induction linear encoder. It weighs 210 g and measures outer diameter (OD), inner diameter (ID), depth, and step, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer "steps" are measured. Outside jaw depth is 50 mm, inside jaw length is 24.5 mm, inside jaw depth is 20 mm, and beam width is 16 mm. Range is 0 to 200 mm, LCD resolution is 0.01 mm, repeatability is 0.0005”/0.01 mm, and accuracy is rated + or - 0.02 mm. Dust/water protection level is IP67. An alarm alerts the user to counting value composition errors. A rolling thumbwheel makes fine adjustments and a thumbscrew locks the scale’s position. Response speed is unlimited. This caliper does not have Statistical Process Control (SPC) Data Output capability. The caliper can be used continuously above 60 Lux ambient illumination. The built-in solar cells can store energy for up to one hour of caliper operation in 50 Lux light.
Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used for measuring size differential between two objects, as well. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices.
Founded in Tokyo in 1934, Mitutoyo is a leader in the metrology field, producing high-quality measurement products, including mechanical, dimensional gauging products, focusing on micrometers, calipers, indicators, and other measurement tools, as well as output gauges, interfaces, data collectors, and analysis software. Mitutoyo formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, Illinois, with additional locations in the U.S. and Canada.
The Mitutoyo 500-775 comes in a fitted, plastic case.
Similar Products